...
Overview
The AccuCheck Guide Me glucometer syncs data with the Validic SDK through Bluetooth broadcasting.
For instructions on how to pair the AccuCheck Guide Me see this page.
What is the AccuCheck Guide Me?
The Accu-Chek Guide Me is a popular meter “intended to quantitatively measure glucose in fresh capillary whole blood from the fingertip, palm, and upper arm as an aid in monitoring the effectiveness of glucose control.”
The Accu‐Chek Guide Me is intended for in vitro diagnostic single‐patient use by people with diabetes. It is also intended to be used by a single person and should not be shared.
Please review the product information for safety guides and a quick start guide to learn how to use the Accu-Chek Guide Me.
When should I expect readings to sync with the Validic SDK?
You should expect the AccuCheck Guide Me to sync readings with the Validic SDK when the device is broadcasting. On the screen of the device, you will see the broadcasting element to the right of the element that notes Bluetooth is enabled.
...
After turning on the device the broadcasting icon will flash for around 15 seconds. This denotes that the device is broadcasting.
When the icon becomes solid (not flashing) the device is no longer broadcasting but it is connected via Bluetooth.
If the broadcasting icon disappears it is not broadcasting and is not connected to Bluetooth.
To get the AccuCheck Guide Me to broadcast again to sync readings it will need to be turned off and turned on again.
...
Device Pairing Specifications
Can only pair with one mobile device at a time
New pairing overwrites any existing pairing
Requires devices to be within 3 feet (1 meter) of each other during pairing
Uses a 6-digit PIN found on the back of the meter for pairing
Pairing prompt times out after 30 seconds
Device Broadcasting States
The device's Bluetooth status is indicated by an icon on the screen:
Active Broadcasting
Icon is flashing
Lasts approximately 15 seconds after the device power-on
Connected but Not Broadcasting
Icon is solid/non-flashing
The device maintains a Bluetooth connection
Disconnected
No Bluetooth icon is visible
No connection
When Data Syncs Occur
The device will sync readings with the Validic SDK:
During the broadcasting window after power-on
When manually triggered by turning the device off and back on
Any stored, unsynced readings will transfer during the next broadcast window
Automatically after each new test when Bluetooth is enabled and connected
Managing Bluetooth Connectivity
To Enable Bluetooth:
With the meter off, press either arrow button to wake
Press and hold until the Bluetooth symbol appears
To Disable Bluetooth:
With the meter off, press either arrow button to wake
Press and hold until the Bluetooth symbol disappears
Additional Features
The meter includes time/date auto-sync when paired with a mobile device
Results are stored from newest to oldest regardless of timezone changes
Disabling Bluetooth does not unpair the device
For detailed pairing instructions, see our AccuCheck Guide Me Pairing Guide. For complete device documentation and safety information, refer to the manufacturer's documentation.